Fujian Auplex Appliance Co.,Ltd.
Add: 3#, No.318, Bailong Industry Park, Minhou, Fuzhou, Fujian, China
Tel:0086-591-83993333      Fax:0086-591-88074649   Email:

When my press is ready to go what should I do first ?

2018-06-19 14:06:48   Click:

The first thing to do is to preheat your lower platen. To do this, simply lower the upper platen onto the lower platen for approximately 30 seconds. This is especially important when applying your first graphic of the day. You don’t need to do this if you are in the middle of long production run, since the platen will naturally be hot from continued use. Preheating the bottom platen helps ensure that the adhesives on the back of the material will be better drawn into the fibers of the substrate to which it is being applied. Heat from both sides of the application helps ensure a better, more permanent result.

powerd by BEESCMS